Image for Illustration purposes only. Actual product may vary
$171.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
OD
4.340 in
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the flexible sleeve which securely lock together under torque for smooth transmission of power
- Torque is transmitted through shear loading of the sleeve
- All three sleeve materials are highly elastic which permits the S-Flex coupling to protect connected equipment from harmful shock loading, vibration, and shaft misalignment
H, HS Sleeve Types
These sleeves feature both a one-piece solid (H) and two-piece split (HS) design and are molded of Hytrel. The sleeves in Hytrel material are designed to transmit power for high torque applications. Because of the design and the properties of the Hytrel molded sleeve, the H and HS sleeves should not be used as direct replacements for EPDM or Neoprene sleeves, and can only be used with S, TF, or SC flanges.
Specifications
| Description | 7H SLEEVE |
|---|---|
| Coupling Size | 7H |
| Sleeve Type | H |
| Type | Sleeves for S-Flex Couplings |
| Material | Hytrel |
| Color | Orange |
| Connection Type A x B | Coupling Sleeve |
| Weight | 1.00 lb |
| Nominal Torque | 2875 in·lb324.83 N·m |
Dimensional Data
| Min. Bore | 0.625 in |
|---|---|
| Max. Bore | 1.625 in |
| Length (Dimension G) | 1.000 in25.40 mm |
| Outside Diameter | 4.340 in110.24 mm |
| Dimension L | 2.190 in55.63 mm |
| Cubic inches | 18.83560 in³ |
Performance Data
| Temperature | -65 to 250 ºF-54 to 121 ºC |
|---|---|
| Max. Speed | 5250.00 rpm |
| Angular Misalignment | 0.25 º |
| Axial Misalignment | 0.1250 in |
| Max. Parallel Misalignment | 0.035 in |
| Max. Torsional Wind-Up Angle | 7.00 º |
Features
Hytrel is a polyester elastomer designed for high torque and high temperature applications and offers excellent resistance to chemical and oil conditions. Color is orange.
Notes
- Operating Hytrel within a high service factor application is not recommended.
- H and HS Type sleeves are designed for high torque applications, transmitting about 4 times as much power as an equivalent EPDM or Neoprene sleeve.
- Hytrel sleeves can be used only with S or SC flanges and can not be used with J or B flanges.
- Hytrel sleeves should not be used as direct replacements for EPDM or Neoprene applications.
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
| Brand | Knipex Tools |
| Model | 98 98 26 US |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/